Health care tools and devices

Bed mover equipped with smart system for hospital bed handling, wrist rehabilitation monitoring system, RFID traceability and temperature monitoring devices.

Bed Mover

Remote rehabilitation

RFID traceability and temperature monitoring devices

Hospital bed mover

BeN Bed Remover

Hospital bed mover (international patent pending) with immediate stop in front of moving obstacles.

Discover more

Electric mover capable of anchoring to the footboard or headboard of the hospital bed or stretcher with an electrically actuated mechanism forming a body integral with it.
The “bed” + “bed mover” assembly can move linearly back and forth but can also translate sideways and diagonally or rotate on its axis (so-called “holonomic system”).
BeN has been specifically designed so that a single operator can easily hook and move the bed without any physical effort and / or torsion of the torso.

BeN is also comfortable for the operator in fact all the mechanisms are electro-actuated, the driving system is an advanced drive-by-wire solution with electric power steering.
The interface is simple and intuitive to use.
The anchoring system is easy to use as it simulates the transport of the human operator by tightening the footboard or headboard between two special hooks.
It is possible without any effort, thanks to the electric power assistance system, to move the vehicle with the bed anchored in a lateral or diagonal direction.

The power assisted electric driving system also allows the vehicle to be rotated at any angle with the bed anchored.
A safety system on the front of the road blocks the handler in case of detection of an object or person along the path.
The vehicle is capable of carrying a maximum load (bed plus patient) exceeding 500 KG on level ground with the ability to overcome slopes up to 5%.

The driving system of the vehicle is simple and intuitive since the vehicle is controlled through a joystick fixed on the vehicle, a system in itself very intuitive made safe thanks to the safety button that stops the vehicle in the absence of pressure.
The presence of a second joystick that allows a de localized control further simplifies the maneuvers since it allows to pilot from any position around the bed.

Product Code: 119.000.00.00.000

Tele-rehabilitation of the wrist

KIT Tele-Rehab

Complete tele-rehabilitation kit (excl. Tablet).

The KIT contains

Complete Tele-rehabilitation kit containing:
• n. 2 TOP devices for hand (M) and forearm (B)
• n. 2 wrist straps for TOP devices
• n. 2 charging base for TOP devices
• n. 1 dual USB power supply

Tablet for the APP not included in the kit

Discover More

Electronic system for monitoring the rehabilitation exercise
CARRIED OUT AT THE HEALTHCARE FACILITY AND AT HOME.
TeleReHab is a wrist rehabilitation monitoring system consisting of:
• two wearable straps with Top M and Top B wireless sensors
• TeleReApp APP that can be installed on a tablet or smartphone, to set and view the exercises.

The angle relative to the movement of the limb is detected during the rehabilitation session providing, in real time, feedback to the patient and the quantitative measure of his/her progress.
The system can be used in a rehabilitation center with the support of a professional operator or even at the patient’s home, in total autonomy, after training by a physiotherapist.

Straps with Top M and Top B sensors
Top M is the sensor to be worn on the hand, Top B is the sensor to be worn on the forearm.
On the upper side of both devices, a label with an arrow indicates the direction in which it must be worn.
A multicolored LED and a vibrating system indicate the different operating states of the devices.
They turn on with a quick movement from top to bottom, communicate with the App via Bluetooth, recharge with a wireless base.

TeleReApp
TeleReApp is the application for Android that allows you to configure rehabilitation exercises for the patient, both the type of exercise and the target angles to be achieved between the body segments.
During the execution of the movements, the App is aimed at establishing a biofeedback on the patient, motivating him in practice.
For this purpose, the type of exercise, the number of repetitions and the angles reached moment by moment are shown, with graphic indicators that are they move and color according to the execution of the single movement.
The App can be installed on Android tablets or smartphones.

Product Code: KN100V010

Tele-rehabilitation of the wrist

TOP B

Telerehab – N.1 TOP B device (forearm) without strap.

See Complte Kit for description.

Product Code: KN100V011

Tele-rehabilitation of the wrist

TOP M

Telerehab – N.1 TOP M device (hand) without strap.

See Complte Kit for description.

Product Code: KN100V014

RFID traceability and temperature monitoring devices

A3 Plate

A compact device for reading and writing multiple HF RFID tags simultaneously.

Discover more

A compact device suitable for use on the work surface or desk. It supports reading and writing multiple HF RFID TAGs simultaneously present in its reading area..
A3Plate uses serial connection to support BarCode readers and USB connection to the PC. It is supplied with MOVE-ID software necessary to interact with the device through higher-level management applications that support identification, monitoring and handling of multiple TAGs simultaneously.
The device has a compact shape in order not to occupy too much space and therefore become a normal accessory connected to the PC present in the workplace.
A3 Plate can turn on/off the TLOG-RFID temperature data recorder and download recorded data through radio communication.

Functions

• Multiple TAG management
• Single or multiple TAG ID verification
• Conversion from BarCode to RFID TAG
• Radio device activation/shut down
• Labeling

Application fields

• Medical
• Retail
• Logistics handling

Product Code: KI105V010
Weight: 2.00kg
Dimensions: 41.00cm x 30.00cm x 3.00cm

RFID traceability and temperature monitoring devices

EmoPath

Gate to read/write multiple HF RFID tags simultaneously.

Discover more

EmoPath is a gate dedicated to the logistics of blood. It is tunnel-shaped with dimensions of approximately 50 cm width, 50 cm depth and 50 height, suitable to accommodate blood bags (3373 series / ADR).
It allows simultaneous reading or writing of up to tens and tens TAGS, applied to blood bags or containers for blood components.
EmoPath uses HF RFID technology for identification and traceability and it stores or reads data on/from the blood TAG.
Through a series of standard commands, it communicates bidirectionally to the Information Management System the identification data of blood bags, tracing the history of the blood bag from the donation to the transfusion to the patient.
In addition, by connecting it to the Ethernet, it can support the logistics between blood centers, hospitals, collection points and the plasma processing industries.
EmoPath is equipped with a wheeled trolley so it can easily move around within the structures; upon request it can be, with a roller to facilitate loading and unloading of containers, blood bags, blood components and biological samples.
EmoPath allows to read and write TLOG-RFID devices, a temperature datalogger to monitor the temperature of blood components during handling.

Product Code: KI107V010
Weight: 25.00kg
Dimensions: 60.00cm x 60.00cm x 80.00cm

RFID traceability and temperature monitoring devices

TLOG RFID

Temperature Datalogger with HF RFID communication interface.

Discover more

TLOG-RFID is a device that stores and tracks temperature and identification data with RFID technology.

Temperature Data Logger allows to have clear information on the integrity of the transported material, providing alarms if the temperature thresholds have not been met (with minimum and maximum temperature thresholds that can be set by the user).

Suitable for use in the logistic movements of perishable materials such as:
• blood bags and blood components
• biological samples
• tissues and organs
• nutritional bags

The activation, deactivation and recovery of the saved data is possible though the radio frequency communication interface HF.
It is a device suitable for the logistics of blood as integrated with carrying bags of blood components (Biological Substance UN3373).
It allows the storage of all data relating to the shipment (identification of operators and containers, temperature data and list of accompanied materials). Its storage capacity is 12000 temperature data and it is also able to acquire data with a sampling frequency that can be set from 1 to 60 minutes.

The TLOG-RFID is a device resistant to immersion in liquids and it is protected against the ingress of dust (with IP67 degree of protection) and can therefore be stored inside the container that carries the samples to be monitored. Its management takes place exclusively via radio for which tampering is not allowed.
No special maintenance is required.It is equipped with a non-rechargeable battery with a duration of up to 5 years and an internal clock.
The management of the TLOG-RFID can take place through integration with the management software or through the “TLOG MANGER” software (licensed).
TLOG-RFID is compatible with Kedos-ID products: EmoPath, TrayID and A3Plate.

Product characteristics

Operating frequency: (HF) 13.56 MHz
Antenna: Integrated
Interface: RFID ISO15693
Protocol: Custom protocol
Software: TLOG MANAGER, MoveID
Power supply: Internal lithium battery 3V , non-rechargeable, non-replaceable , life battery up to 5 years
Storage: max 6 months
Temperature range:
• Operating [-30°C, 50°C]
• Storage [- 40°C, 85°C]; HR 95% (without condensing)
Protection grade: IP67
Internal temperature sensor
• Working Range: [-30°C, 50°C]
• Resolution: +/-0,1°C
• Accurancy: +/-0,8°C [-30°C, -10°C] / +/-0,5°C [-9°C, 50°C]
Clock: Internal Real Time Clock
Storage memory: 12000 temperature samples
Sampling interval: configurable from 1 second to 10 minutes
Sampling duration: 72 hours not sopped with sampling at 4 min
Conformity: RoHS (2002/95/CE)
Certification: CE Compliant

Product Code: KI104V010
Weight: 0.08kg
Dimensions: 10.50cm x 6.50cm x 2.00cm

RFID traceability and temperature monitoring devices

Tray-ID

Small plate to read and write HF RFID tags.

Discover more

TrayID is a product that supports the RFID reading and writing of one or more TAG simultaneously present in its reading area.
It’s a compact product with the aim of not occupy too much room on the desk so as to become a normal accessory to be connected to the PC in this location.

Thanks to the anti-collision system implemented, the operation is guaranteed even in case of multiple presenceof TAG.
TrayID in its standard version includes a USB typecommunication. Normally it connected to a PC used to communicate with the latter making the managed data available to applications that need to use them.

The functions provided are those of reading and writing of the memory contents of the different TAG present.
Optionally it can be provided with software that allows for easy setup, setup and management of the read and write capabilities of the TAG present.

Areas of application

Possible areas of application are as follows:
• in the Retail to read single and multiple RFID TAGs
• in the medical field where access to the RFID tracking ofblood bags, test tubes, biological samples in general aswell as in the drug supply

Product Code: KI109V012
Weight: 0.50kg
Dimensions: 25.00cm x 17.00cm x 1.50cm

RFID traceability and temperature monitoring devices

H2-Reader Wifi Display

Bar code reader and reader/writer RFID HF with Wifi communication, display, rechargeable battery.

Discover more

H2Reader is a reader / writer that simultaneously supports RFID HF 13.56MHz and Bar-Code technology.
H2Reader is able to support optical standards most popular on the market.

H2Reader Wi-Fi is powered by a rechargeable battery and through Wi-Fi communication is connected on a WLAN network to communicate with the software that integrates the features needed by the user.
H2Reader connects with a USB cable to the PC where the software resides to manage the features the user needs.
H2Reader is equipped with 3 buttons (RFID, BarCode, assignable functions), indicator of battery level (vers. Wi-Fi) and if it is expected by the software provide to the user the reply through led, buzzer, vibration and display (if it is expected).
The version of the H2reader with display TFT – with 1,8” colors LCD, is equipped with 4 buttons with functions set up from the contest.

The device is very useful for BC and RFID operations in mobility and with necessity to send instruction and display feedback for each operator.
The flexibility to assign functions to buttons, combined with the display versatility (multicolor, TFT-LCD) permits a vast range of applications.

The fact of being handy and easy to use makes H2Reader applicable in many contexts and sectors, virtually anywhere there is the need to manage both BarCode and RFID technology with a single instrument.

Product characteristics

Operating Frequency (HF): 13.56 MHz
Interface: RFID ISO 15693
Communication Protocols: ISRF Open Protocol
RFID Antenna: Integrated
BarCode module: Integrated
Communication options:
• USB 2.0
• WiFi
Power supply:
• USB 5VDC 1000mA per ricarica
• Rechargeable Battery (WIFI/Display version)
Operating temperature:
• Operative [+5 ÷ +45 °C]
User Interface:
• Display TFT-LCD 1,8”, 65K Colors
• 4 buttons + 4 buttons if display present
• Vibrating sensor
• 3 Led: RFID Status, BarCode Status, Connection
• Buzzer
RoHS Fully RoHS (2002/95/CE) Compliant – CE Compliant
Software: RFID Manager
Operating System:
• Windows 10
• DLLs, API available

Product Code: KI106V012
Weight: 0.16kg
Dimensions: 12.00cm x 8.00cm x 2.50cm

RFID traceability and temperature monitoring devices

H2-Reader USB

Bar code reader and reader/writer RFID HF with USB communication.

Discover more

H2Reader is a reader / writer that simultaneously supports RFID HF 13.56MHz and Bar-Code technology.
H2Reader is able to support optical standards most popular on the market.
H2Reader is powered by USB connection to the PC and communicates with the software that integrates the features needed by the user.

H2Reader is equipped with 3 buttons (RFID, BarCode, assignable functions) and, if it is allowed by the software, provides to the user the reply through led, buzzer, vibration.
The fact of being handy and easy to use makes H2Reader applicable in many contexts and sectors, virtually anywhere there is the need to manage both BarCode and RFID technology with a single instrument.

Product characteristics

Operating Frequency (HF): 13.56 MHz
Interface: RFID ISO 15693
Communication Protocols: ISRF Open Protocol
RFID Antenna: Integrated
BarCode Module: Integrated
Communication options: USB 2.0
Power supply: USB 5VDC 1000mA
Operating temperature: Operative [+5 ÷ +45 °C]
User interface:
• Vibrating sensor
• 3 Led: RFID Status, BarCode Status, Connection
• Buzzer
RoHS Fully RoHS (2002/95/CE) Compliant – CE Compliant
Software: RFID Manager
Operating System:
• Windows 10
• DLLs, API available

Product Code: KI106V011
Weight: 0.16kg
Dimensions: 12.00cm x 8.00cm x 2.50cm

RFID traceability and temperature monitoring devices

Tertiary container/bag for blood bags with RFID

Tertiary container for the transport of bags of blood and blood components, with thermal protection and RFID tag.

Discover more

It is designed and built for the transport of a secondary container dedicated to bags of whole and processed blood or two secondary containers for the transport of test tubes or, more generally, of biological liquids, characterized by:
• Identification with HF 13.56MHz RFID TAG ISO 15693 standard with internal memory.
• Very resistant material that ensures a certain strength to shocks and falls and therefore to possible breakages.
• Padding that allows a long duration of maintenance of the internal temperature suitable for the transport of blood components and biological liquids at critical temperatures (-30 ° C, + 4 ° C, + 22 ° C). The duration of temperature maintenance depends on several factors:
– quantity and internal material temperature
– quantity and quality of the eutectic plates used
– internal temperature to be maintained and external temperature
• 4 internal side pockets with the possibility of internal or external insertion to the pocket, plus fixing system on the lid for housing water or gel stabilizing cooling elements (eutectic plates).
• Internal pocket for inserting a data-logger for temperature monitoring.
• External pocket for documents.
• Strap for easy transport by operators.
• Prints according to ADR (UN3373, Biological material category B, Blood components transport).
• Possibility of customized printing of the Hospital Company Logo.

Product Code: KI100V010
Weight: 2.00kg
Dimensions: 43.00cm x 43.00cm x 29.00cm

RFID traceability and temperature monitoring devices

TLOG Manager

Software application to manage TLOG-RFID temperature data logger.

Discover more

PC-Windows desktop software application for managing the TLOG RFID temperature data logger product (code KI104V010):
• configuration
• start
• arrest
• download and save temperature data, identifier and notes
• graphic display of temperatures

This management takes place through the RFID reader / writer equipment:
• A3 -Plate cod. KI105V010
• TRAY-ID cod. KI109V012
• EmoPath (gateway / tunnel) cod. KI107V010

Node locked licensing

Product Code: KI300V013